1.Pictures of Products
2.Features of Products
1.Combined with high-quality features in Europe, Japan and China Taiwan and other models. Used widely;
2.Foam products have low moisture content. Low energy consumption and short production cycle time. Perfect stabilization of size;.
3.Interchangeable various types of moulds, equipment compatibility, saving mould cost;
4.The frame is welded by quality steel, high strength and good stability;
5.Rack failure annealed after welding heat treatment. Using imported CNC machining center. The underlying fine uses sand-blasting, galvanizing and the overall surface painted, high corrosion resistance;
6.Using advanced multi-cylinder hydraulic clamping systems, high clamping speed and locking strength;
7.Using advanced central energy distributor, for good steam pressure balance and stability;.
8.Efficient vacuum cooling system with spray nozzle, independent of the drainage system, greatly reducing vacuum time;
9.Pressure feed, advanced sensors to control the feeding amount and density;
10.Automatic computer control system, color touch-screen control, easy to operate.
3.Technical Data of Products
Item | Unit | Type/Technical Data | |||||
CH CX1210 BA | CH CX1412 BA | CH CX1513 BA | CH CX1715 BA | CH CX1816 BA | |||
Platform Size | mm | 1200×1000 | 1400×1200 | 1500×1300 | 1700×1500 | 1800×1600 | |
Mould Demension | mm | 1030×800 ×400 | 1230×1030×400 | 1330×1130×400 | 1530×1130×400 | 1630×1430×400 | |
Rear window area | mm | 1050×850 | 1250×1050 | 1350×1150 | 1550×1350 | 1650×1450 | |
Steam | conduit Interface | mm | DN80 | DN80 | DN80 | DN100 | DN100 |
Mould Interface | mm | DN40 | DN40 | DN40 | DN40 | DN40 | |
Working Pressure | kg/cm2 | 3-6 | 3-6 | 3-6 | 3-6 | 3-6 | |
consumption | kg/cycle | 2-3.5 | 2-3.0 | 2-3.0 | 2-3.5 | 2-3.5 | |
Cooling Water | conduit Interface | mm | DN80 | DN80 | DN80 | DN80 | DN80 |
Mould Interface | mm | DN25 | DN25 | DN25 | DN25 | DN25 | |
Working Pressure | kg/cm2 | 3.0-4.0 | 3.0-4.0 | 3.0-4.0 |